FREE SHIPPING on orders over $200!*

Diff Wizard

01-06 Toyota SEQUOIA rear axle bearing O-ring.
'01-'06 Toyota Sequoia Rear Axle Bearing O-Ring $ 19.15
Quick Shop
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs.     This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon's Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.
'05-'08 SRT8 Grand Cherokee & '06-'07 Commander MASTER OVERHAUL kit. $ 311.42
Quick Shop
'86-'95 Samurai knuckle kit (2 sides) with bearings, seals, Wipers. This kit includes high quality Nachi bearings.
'86-'95 Samurai Knuckle kit $ 110.38
Quick Shop
(2) Yukon Chrome Moly Superjoints, replacement for Dana 60
(2) Yukon Chrome Moly Superjoints, replacement for Dana 60 $ 649.12
Quick Shop

(4) Full Circle snap rings, fit 297X U-joint with aftermarket axle.
(4) Full Circle Snap Rings, fit 297X U-Joint with aftermarket axle. $ 12.79
Quick Shop
(4) Full Circle snap rings, fits Dana 60 733X U-joint with aftermarket axle.
(4) Full Circle Snap Rings, fits Dana 60 733X U-Joint with aftermarket axle. $ 12.79
Quick Shop
(GM only) C/clip Eliminator kit with 1563 bearing.
(GM only) C/Clip Eliminator kit with 1563 Bearing. $ 287.66
Quick Shop
.045" preload shim for Magna / Steyr front
.045" preload shim for Magna / Steyr front $ 68.84
Quick Shop

0.260" diameter cross pin roll pin for 8.75" Chrysler, 8", 9" Ford, and Model 20 and 35.
0.260" diameter cross pin roll pin for 8.75" Chrysler, 8", 9" Ford, and Model 20 and 35. $ 1.55
Quick Shop
0.795" diameter notched cross pin shaft for 10 bolt 8.5" GM (not Eaton). This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.
0.795" diameter notched cross pin shaft for 10 bolt 8.5" GM $ 25.58
Quick Shop
01 & up C9.25 pinion setup bearing. No Return.
01 & up C9.25 pinion setup bearing. $ 108.27
Quick Shop
03-06 PONTIAC GTO differential pinion seal.Yukon Mighty seal.
03-06 PONTIAC GTO differential pinion seal $ 61.54
Quick Shop

03-06 PONTIAC GTO differential side seal.Yukon Mighty seal.
03-06 PONTIAC GTO differential side seal $ 56.29
Quick Shop
04 & up 4WD + AWD S10 & S15 7.2IFS left hand stub axle seal.
04 & up 4WD + AWD S10 & S15 7.2IFS left hand stub axle seal. $ 34.05
Quick Shop
04 & up 4WD + AWD S10 & S15 7.2IFS pinion seal.
04 & up 4WD + AWD S10 & S15 7.2IFS pinion seal $ 14.65
Quick Shop
04 and up Durango, 07 and up RAM 1500 rear axle seal, 8.25" /9.25".Yukon Mighty seal.
04 and up Durango, 07 and up RAM 1500 rear axle seal, 8.25" /9.25". $ 25.77
Quick Shop

07 & up Tundra & Sequoia front ring gear bolt..
07 & up Tundra & Sequoia front ring gear bolt. $ 2.63
Quick Shop
07 and up Tundra 10.5" rear pinion seal W/ 5.7L.Yukon Mighty seal.
07 and up Tundra 10.5" rear pinion seal $ 59.78
Quick Shop
07 and up Tundra 9.5" rear pinion seal W/ 4.0L & 4.7L.Yukon Mighty seal.
07 and up Tundra 9.5" rear pinion seal $ 57.98
Quick Shop
07 and up Tundra front outer slinger.
07 and up Tundra front outer slinger $ 15.96
Quick Shop

07 and up Tundra front pinion nut.
07 and up Tundra front pinion nut. $ 11.79
Quick Shop
07 and up Tundra front pinion seal.Yukon Mighty seal.
07 and up Tundra front pinion seal $ 68.75
Quick Shop
07 and up Tundra rear 10.5" cross pin shaft W/5.7L.
07 and up Tundra rear 10.5" cross pin shaft W/5.7L. $ 85.96
Quick Shop
07 and up Tundra rear 10.5" crush sleeve W/5.7L. Approx 0.950" long.
07 and up Tundra rear 10.5" crush sleeve W/5.7L $ 27.46
Quick Shop

07 and up Tundra rear 10.5" pinion gear Thrust washer W/5.7L.
07 AND UP TUNDRA REAR 10.5" Pinion gear Thrust Washer W/5.7L. $ 8.15
Quick Shop
07 and up Tundra rear 10.5" ring gear bolt W/ 5.7L.
07 and up Tundra rear 10.5" ring gear bolt W/ 5.7L. $ 7.87
Quick Shop
07 and up Tundra rear 9.5" carrier case W/4.0L & 4.7L.
07 and up Tundra rear 9.5" carrier case W/4.0L & 4.7L. $ 496.22
Quick Shop
07 and up Tundra rear 9.5" cross pin shaft W/ 4.0L & 4.7L.
07 and up Tundra rear 9.5" cross pin shaft W/ 4.0L & 4.7L. $ 72.04
Quick Shop

07 and up Tundra rear 9.5" crush sleeve W/ 4.0L & 4.7L.
07 and up Tundra rear 9.5" crush sleeve W/ 4.0L & 4.7L. $ 29.90
Quick Shop
07 and up Tundra rear 9.5" pinion gear Thrust washer W/4.0L & 4.7L.
07 AND UP TUNDRA REAR 9.5" Pinion gear Thrust Washer W/4.0L & 4.7L. $ 8.15
Quick Shop
07 and up Tundra rear 9.5" ring gear bolts W/ 4.0L & 4.7L.
07 and up Tundra rear 9.5" ring gear bolts W/ 4.0L & 4.7L. $ 7.87
Quick Shop
1.250" pinion adaptor sleeve (stock pinion into large support).
1.250" Pinion Adaptor Sleeve (stock pinion into large support). $ 39.24
Quick Shop

1/2" to 7/16" ring gear bolt sleeve.
1/2" to 7/16" Ring Gear bolt Sleeve. $ 5.82
Quick Shop
'10 & up V6 Camaro 195mm/ GM 7.6IRS pinion seal
10 & up V6 Camaro 195mm / GM 7.6IRS pinion seal $ 29.87
Quick Shop
'10 & up V6 Camaro GM 7.6IRS stub axle seal.Yukon Mighty seal.
10 & up V6 Camaro 195mm / GM 7.6IRS stub axle seal. $ 29.37
Quick Shop
10 & up V8 Camaro 218mm / 8.6IRS pinion seal
10 & up V8 Camaro 218mm / 8.6IRS pinion seal $ 33.58
Quick Shop

10 Bolt open spider gear set for '00-'06 8.6" GM with 30 spline axles. Fits case with one large window and one small window. A new carrier case will be needed for '99 vehicles in order to use this spider gear set. This spider gear set fits casting number 7875 & 1073.
10 Bolt open spider gear set for '00-'06 8.6" GM with 30 spline axles $ 134.28
Quick Shop
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades.    Carrier installation kit for Ford 10.25" & 10.5" differential. This kit contains carrier bearings, races and shims.
10.25" & 10.5" Ford carrier installation kit $ 177.64
Quick Shop
10.25" Ford " OEM" pinion seal.Yukon Mighty seal.
10.25" Ford " OEM" pinion seal $ 26.00
Quick Shop
10.25" Ford TracLoc pinion gear Thrust washer.
10.25" FORD TracLoc Pinion gear Thrust Washer $ 5.60
Quick Shop

10.25" TracLoc (Ford case) Paper/Composite Lined clutch set, positraction.
10.25" TracLoc (Ford Case) Paper/Composite Lined Clutch Set $ 171.24
Quick Shop
10.25" TracLoc steel clutch set with Guides.
10.25" TracLoc Steel Clutch Set with Guides $ 255.09
Quick Shop
10.5" & 11.5" GM & Dodge pinion seal.Yukon Mighty seal.
10.5" & 11.5" GM & Dodge pinion seal $ 15.18
Quick Shop
10.5" Chrysler Helical gear Type positraction.
10.5" Chrysler Helical Gear Type positraction $ 991.53
Quick Shop

10.5" Chrysler standard Open side gear thrust washer for Dodge.
10.5" Chrysler Standard Open Side Gear and Thrust Washer for Dodge $ 12.21
Quick Shop
10.5" Dodge crush sleeve. Approx 2.310" long.
10.5" Dodge Crush Sleeve $ 9.50
Quick Shop
10.5" Dodge pinion nut.
10.5" Dodge pinion nut $ 9.74
Quick Shop
10.5" Ford rear wheel seal.Yukon Mighty seal.
10.5" Ford rear wheel seal $ 26.67
Quick Shop

1 2 3 95 Next »